tunnel
bridge
Enables tunneling of unicast messages, to unknown MAC destinations, on the selected VLAN bridge
Supported on the following devices:
- Access Points:
AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632,
AP7662, AP8163, AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
tunnel [rate-limit|unknown-unicast]
tunnel rate-limit level2 rate <50-1000000> max-burst-size <2-1024> {red-threshold [background <0-100>|best-effort <0-100>|video <0-100>|voice <0-100>]}
Parameters
tunnel rate-limit level2 rate <50-1000000> max-burst-size <2-1024> {red-threshold [background <0-100>|best-effort <0-100>|video <0-100>|voice <0-100>]}
| tunnel
rate-limit level2 rate <50-1000000> max-burst-size
<2-1024> |
Configures a
rate-limit parameters (max-burst-size and rate) for tunneled VLAN traffic
over level 2 MiNT links
- rate – Optional.
Configures the data rate, in kilobits per second, for the incoming and
outgoing extended VLAN traffic tunneled over MiNT level 2 links
- <50-1000000> –
Specify a value from 50 - 1000000 Kbps. The default is 5000
Kbps.
- max-burst-size –
Optional. Configures the maximum burst size
- <2-1024> –
Specify the maximum burst size from 2 - 1024 kbytes. The default
is 320 kbytes.
After specifying the
max-burst-size, optionally specify the red-threshold value for the
different traffic types. The red-threshold is configured as a % of the
specified max-burst-size.
- red-threshold – Optional.
Configures the random early detection (red) threshold for the
different traffic types
- background –
Configures the red-threshold for low priority traffic from 0 -
100. The default is 50% of the specified max-burst-size.
- best-effort –
Configures the red-threshold for normal priority traffic from 0
- 100. The default is 50% of the specified max-burst-size.
- video – Configures
the red-threshold for video traffic from 0 - 100. The default is
25% of the specified max-burst-size.
- voice – Configures
the red-threshold for voice traffic from 0 - 100. The default is
0% of the specified max-burst-size.
|
tunnel unknown-unicast
| tunnel
unknown-unicast |
Enables tunneling of unicast packets destined for unknown MAC addresses |
Example
nx9500-6C8809(config-profile TestAP8432-bridge-vlan-1)#tunnel unknown-unicast
nx9500-6C8809(config-profile TestAP8432-bridge-vlan-1)#no tunnel unknown-unicast
nx9500-6C8809(config-profile TestAP8432-bridge-vlan-1)#show context
bridge vlan 1
ip igmp snooping
ip igmp snooping querier
no tunnel unknown-unicast
nx9500-6C8809(config-profile TestAP8432-bridge-vlan-1)#
Related Commands
| no |
Disables tunneling of unicast messages, to unknown MAC destinations, on the selected VLAN bridge |
